Manufacturers and exporters of all types of scientific & laboratory instrument, Laboratory Glassware & Plastic-ware & Porcelain-ware, Medical & Surgical Equipment, Biological Models, Anatomical Models & Charts. Dealers enquires are solicited for the company
 

Language Translator

Biology

Chemistry

Physics

 
Request a Call Back
 
Chemistry > Lab Glass General Labware
 
BALANCE CHEMICAL   (2501)

For use in chemists shop and schools upto intermediate classes, designed and fabricated for rough handling.
Beam :Brass beam with 100 notches graduated for rider use with zero at center
Arrestment :Six-point arrestment. The beam is raised for working
Rider :Single wire, easy operating arrangement
Knives and Planes :Best quality agate
Pan :Stainless steel concave inwards
Pan Diameter :7. 5 cm
Capacity :200 gm
Sensitivity :0. 2 mg


BALANCE ANALYTICAL   (2502)

A short-armed triangular type Beam Balance. It is very suitable for research work in universities and industrial laboratories, specially designed to maintain constant sensitivity under varying load and acute self- acting parallel arrestment of the beam.
Capacity : 200 gm
Sensitivity : 0. 1 mg
Pan Diameter :7. 5 cm


BALANCE CHAINOMATIC   (2503)

A short beam highly sensitive, divide in graduation 0-1g for rider, extended sports movement on agates and bearings, two pan attached with hanger and two air damping system upon the pan. Dial of chain 0-100mg. Pillar mounted on wooden mica base, front and side doors, teakwood case. Three leveling screws for accurate level.
Capacity : 200 gms.
 Sensitivity : 0.1 mg.


BALANCE BERANGER   (2504)

Cast iron moulded body all working parts of tempered steel. Spray painted finish. Both sides removable steel pans with pointer in the centre. Useful for quick weighing of heavy articles.


BALANCE TRIPLE BEAM   (2505)

A single pan low form balance with three tired beams which can weigh up to 2610 gm. when used with supplementary masses, the balance has three notched weighing beam with center indicating sliding masses giving total capacity of 610gm. Additional masses are hung on the Beam increasing the capacity up to 2610gm. And they can be stored in the recessed base when not required.
Magnetic damping :
Beams :0 to 500g x 100gm.
0 to 100g x 10gm.
0 to 10g x 0.1gm.
Supplementary masses :2 x 1000gm.
1 x 500gm.
Pan :Stainless Steel (dia.150 mm.)


BALANCE SINGLE PAN, FOUR BEAM   (2507)

Single pan balance, capacity 311g x10mg with FOUR BEAMS each provided with a non-removable slider and graduated 0-200x100g, 0-100x10g, 0-10x1g and 0-1gx0mg respectively.

Additional masses are not required. With zero adjustment and stainless steel pan 90mm diameter with two pouring spouts and handle. Height of stirrup 175 mm. Magnetically damped beam movement ensures rapid weighing. A platform housed in the base can be used for density determination.



BALANCE TRIPLE BEAM   (2508)

With single pan and captive weights sliding on scales. Reading can be taken with index scale and pointer.
Mounted on wooden base.
Scale Division :  
On Rear Scale0-1gm x 100 mg.
On Middle Scale 0-300 Gms.
On Front Scale0-10gm x 1 gm.
  
Capacity : 311 gm.
Sensitivity : 2 mg.
Distance Hook to Pan : 170 mm.
Pan Diameter : 110 mm.


BALANCE, DOUBLE BEAM   (2509)

Two pan balance for accurate and rapid weighing up to 2kg, used with supplementary masses. With cast alloy base and features angled beams with center reading poises, magnetic damping, spring loaded zero adjust compensator, precision ground knives and cross braced aluminium alloy beam.
Equipped with facility for under balance weighing.
Beams : 0 to 200g x 10g  and  0 to 10 g x 0.1g
Pan : Stainless Steel Dia.150 mm.
 Accessory tare and rod optional


PERSONAL WEIGHING SCALE   (2510)

Platform type scale, calibrated 125x0.5 kg. with zero adjustment and magnifier over scale opening.
Accurate, sensitive and portable.


COMPRESSION BALANCE   (2511)

Plastic case slopping front detachable rigid plastic load pan. Krumbbled Zero adjustment control. Capacity: (a) 1Kg x 5g (b) 2Kg x 10g (c) 4Kg x 20g


BURNER BUNSEN   (2512)

Nickel-plated burner tube of brass 12 mm. diameter with air regulator adjustable and a cylindrical riffled, mounted on a painted metal base. Suitable for Natural gas. Brass tube 100 x 12 mm. Height x diameter. Base 70-mm. diameter.Overall height 145 mm.


BURNER BUNSEN   (2513)

Nickel-plated burner tube of brass 11mm. diameter with air regulator adjustable and a cylindrical riffed connector, mounted on a painted metal base. Suitable for Natural gas. Brass Tube 90 x 11 mm. height x diameter. Base 90-mm. diameter. Overall height 130 mm.



BURNER TECLU   (2514)

Chrome plated brass tube with air regulator. Designed to give very high temperature. Overall height 15cms. and base dia. 8cms. approx.


BURNER MECKER   (2515)

Nickel plated burner tube of brass fitted with Steel/Ceramic grid 22 mm. diameter to give a high and evenly distributed flame temperature. Painted metal base.


FLAME SPREADER   (2516)

To fit onto Bunsen burner so as to provide wide flame for bending glass tubing.



WATER BATH(Copper)   (2517)

Hemispherical, made from thick copper sheet, with two handles and a set of concentric rings.
Diameter (mm)
a.100
b.125
c.150
d. 200



WATER BATH (Aluminium)   (2518)

Hemispherical, made of thick aluminium sheet, with two handles and a set of concentric rings.
Diameter (mm)
a.100
b.125
c.150
d. 200


WATER BATH (Aluminium)   (2519)

Cylindrical, made from thick aluminim sheet, with two handles and a set of concentric rings.
Diameter (mm)
a.125
b.150
c.200


WATER BATH   (2520)

With built- in Electric heating circular water bath. Anodized aluminium, 200mm diameter 125mm deep, with integral constant level device, set of aluminium rings, plastic feet and 1KW heater with overheat protection device. With connector and 3- core cable. For 220-240Volt AC supplies. Spare heating element 1KV for above available at extra cost.


BASIN EVAPORATING   (2521)

Porcelain, flat form, glazed inside and outside, with spout.
 ABCDEF
Outer Dia (mm)6075100125150175
Height (mm)2550100260380600


BASIN EVAPORATING   (2522)

Porcelain, shallow form, glazed inside and outside, with spout.< /tr>
 ABCDEFGHI
Outer Dia (mm)254050607585100110125
C apacity (ml) 8152040100125175275450


CRUCIBLE   (2523)

Porcelain, Squat type, glazed inside and outside, complete with lid having ringed handle.Capacity (ml)
 ABCDEFGH
1525305080100150200



CRUCIBLE   (2524)

Porcelain, Tall form. Glazed inside and outside, Complete with lid having ringed handle.
 ABCDEFG
Capacity (ml) 102025303550100


CRUCIBLE, SILICA   (2525)

Low form, glazed inside and outside, translucent.
 Capacity (ml)
a.15
b.

25

c.50
d.< /td>80
e.150
Also available nickel and platinum crucibles of different capacities /Sizes.


CRUCIBLE GOOCH   (2526)

Porcelain glazed outside and without lid.
 Capacity (ml)
a.15
b.

20

c.25
d.< /td>30
e.50
f.100


CRUCIBLE WITH LID, NICKEL   (2527)

Nickel Crucibles, 0.5mm thick.
Capacity (ml)Dia. (mm) Lid Dia. (mm)
102525
153030
253535
304040


TROUGHS PNEUMATIC   (2528)

Made of soda glass.
 abcdef
Height (cms)10101012.512.515
Diameter (cms)152025253030


BEEHIVE SHELVES   (2529)

Made of porcelain, for pneumatic trough, glazed inside and out.
 abcd
Capacity (ml) 67.58.510


RETORT STOPPERED   (2530)

Made of Borosillicate glass.
 ab
Capacity (ml) 250500


GAS WASH BOTTLE WOULF   (2531)

Glass, with 2 necks.
 ab
Capacity (ml) 250500



KIPP’S APPARATUS   (2532)

Made of soda glass, complete with delivery tube, thistle funnel and rubber cork.
abcd
Capacity (ml)2505007501000


KIPP’S APPARATUS   (2533)

Made of Borosillicate glass. A rapid and effective apparatus to produce controllable amounts of common gases such as hydrogen sulphide, carbon dioxide etc. It is quickly changed and assembled, simple to operate.
abc
Capacity (ml)2505001000



DEFLAGRATING SPOON AND CAP   (2534)

Steel cup & rod held by cork, al.  cap, length 35cm,  cap dia 90mm,  cup 18mm.


DEFLAGRATING/COMBUSTION SPOON   (2535)

Heavy gauge stainless steel wire, for use in test tubes 150 x 25mm. Shaft shaped to prevent contact with wall. Length 20 cm. and diameter of cup 18 mm.


WIRE GAUGE , IRON   (2536)

Made of G.I. wire, asbestos centre, extra strong quality. In squares, pack of 10 pcs.
Sides : a) 12.5 cms and (b) 15 cms


WIRE GAUGE, IRON   (2537)

Made of Steel wire, ceramic center, extra strong quality, in squares, pack of 10 pcs.
Size : (a) 12.5 cms  and (b) 15 cms


CLAY PIPE TRIANGLE   (2538)

Clay pipe on thick iron wire.
Size (cms) : (a) 5  (b) 6 (c) 7.5


SPIRIT LAMP GLASS   (2539)

With metal wick holder and glass stopper, superior quality.
Capacity (ml) : (a) 60 and (b) 125


SPIRIT LAMP GLASS   (2540)

Polyhedral, heavy duty allows the position of flame at just the right angle for each task, complete with cap and one wick.


SPIRIT LAMP   (2541)

Metallic Sheet die pressed, with woven wick in metal holder, screw on cap. Capacity 100 m.
Metal :
(a) Aluminium
(b) Brass
(c) Stainless Steel


MORTAR AND PESTLE   (2542)

Porcelain, good quality, unglazed inside, glazed outside.
 abcdefg
Sides (cms) : 7.51012.51517.52025


SPOTTING TILES   (2543)

Made of porcelain
  a b
Depressions 6 12


TROUGHS MERCURY   (2544)

Porcelain, glazed
Shape : (a) Round (b) Oval


WATCH GLASSES   (2545)

Polished, ground edges, made from selected glass sheet.

 abcdefg
Diameter (cms)567.591012.515


SYPHON   (2546)

The siphons are self- priming. Container may be emptied inserting the open end of the tube in the liquid and pumping the bulb with stopcock closed. As soon as the liquid enters the bulb, the flow is automatically regulated. No further pumping is needed and the stopcock may be used to dispense whenever required.
Size (mm) : (a) 6 and (b) 12.5


JACK LABORATORY   (2547)

Completely stable and free form rocking movements. Box type. Load platform size 14 x 12.5 cms. Closed height 7 cms. Open height 22.5 cms. Maximum load capacity 5 kgs.


STAND TRIPOD, CIRCULAR   (2548)

Cast iron and mild steel legs. Finished in hammer/black color and legs are bent outward for stability.

 Height (cms) Diameter (cms)
a.2012.5
b.2015



STAND TRIPOD, TRIANGULAR   (2549)

Cast iron top and mild steel legs. Finished in hammer/black color and legs are bent outwards for stability.
  Height (cms) Length of Side (cms)
a. 20 12.5
b. 20 15


STAND TRIPOD, TRIANGULAR   (2550)

Top triangular, Stainless steel, length of one side 13 cms. and height 20 cms.


RETORT STAND BASE, TRIPOD   (2551)

Complete with rod, cast iron base, painted in blue / black color and with hole. Iron rod 12.5 mm diameter nickel-plated. One end of rod is rounded and the other end is machine threaded with washer and hexagonal nut. Rod Length (cms) 20, 15, 75


RETORT STANDS BASE, RECTANGULAR   (2552)

Complete with rod, cast iron base, painted in blue/black color and with hole. Iron rod 12.5 mm diameter nickel-plated.
One end of rod is rounded and the other end is machine threaded with washer and hexagonal nut.
 abcd
Base Size (cms)16 x 1020 x 12.525 x 1531.5 x 20
Rod Length (cms)506075100
Base Weight (kgs) approx.0.751.252.033


RETORT STAND BASE, RECTANGULAR   (2553)

Complete with rod, base made of mild steel plate with hammer black powder coated finish and hole. Iron rod 12.5 mm diameter nickel-plated provided with locked pin for extra tightening of rod. Base fitted with levelling screw and feet.
 abcde
Base Size (cms)20 x 12.522.5 x 1522.5 x 1530 x 2030 x 20
Rod Length (cms)6060757590



RETORT STAND BASE   (2554)

Rectangular pressed stainless steel, hole is located centrally on the length.
 ab
Base Size (cms)15 x 1020 x 13
Rod Length (cms)6060



RING RETORT STAND   (2554-A)

Malleable iron, ring and arm of strong circular section, with open boss fitted with thumb- screw to clamp on stands. Distance between center of ring and supporting rod is 12cms. Fits rods upto 13 mm. With the following inside diameters
A: 5.5 cms.
B: 7.5 cms.


BOSS HEAD   (2555)

For laboratory stand, die pressed of mild steel strip, chrome plated, accept rod up to 18 mm. diameter and clamp rod 7.5 mm diameter which are secured with nickle -plated thumb screws.



BOSS HEAD   (2556)

For laboratory stand, for use in schools and colleges, die-asted alloy, accepts rods up to 16.5 mm. diameter at right angle to each other which are secured with nickle plated brass Tommy screws.


RETORT RING EXTENSION   (2558)

Made of heavy metal with side rod for insertion in clamp holders. Dimensions are approx.


DROPPER WITH RUBBER TEA T   (2560)

Capacity 1.7cm approx. , rubber teat, length 40mm, 110mm overall. 



RETORT RING   (2561)

Rings, with plain stem 8-mm. diameter with welded joints for greater strength. Diameter Inside (cm): 5.5, 7.5, 10


CLAMP UNIVERSAL   (2562)

Made of sheet metal and chrome plated, spring controlled jaws cork lined which can accept 12 to 50 mm dia., articles with brass wing nut fitted with 15 cm., long mild steel rod.


CLAMP RETORT   (2563)

Two prong, comprises alloy pressure die casting with other parts of plated brass, clamp accepts articles from 15-60mm dia, actuated by nickle plated brass pummles and with twin screws, the jaws are cork lined. fitted with 15Cms. long mild steel or Al. rod.


CLAMP RETORT   (2564)

Die-cast alloy with of plated brass parts. clamp accepts articles from 2-90mm. diameter actuated by nickle plated brass twin screws, The design of the jaws ensures firm grip at all angles of opening and cork lined, complete with 15cm long MS or aluminium rod.


CLAMP RETORT   (2565)

Three prong, die cast in alloy, other parts made of plated brass, clamp accepts articles upto 75mm. diameter, two nickle plated brass screws, and jaws are covered in rubber, fitted with 15Cms long MS. or Al. rod.



COMBINED CLAMP   (2566)

Die cast aluminium alloy moulded clamp, spring controlled cork lined or rubber covered jaws with aluminium alloy boss head. Boss head accommodates rods up to 15mm and can rotate with the help of wing nut.
a. Three finger clamp.
b. universal clamp.



FLASK HOLDERS   (2567)

For holding flat, conical and round bottom flasks with adjustable chrome plated brass arms.
Capacity: 100, 250, 500, 1000, 2000ml.


CLAMP JUMBO   (2568)

same as above but with rubber coated jaws and 28cms long MS. rod of 10cms dia.


TEST TUBES   (2569)

With side arm, made of Borosilicate glass. Sizes are approx.


TEST TUBES   (2570)

With horizontal side arm bent downwards at 45º, size 150 mm in height and 24 mm in diameter approx.


TEST TUBES   (2571)

Graduated or non graduated medium wall, with or without rim, Borosilicate glass. Graduations are clearly marked in white colour.


TEST TUBE HOLDER   (2572)

Wood, with spring steel for closing jaws.
a). length 18 cm, accepts tubes 11-19mm.
b). length 26 cm, accepts tubes 11- 30 mm.


TEST TUBE HOLDER   (2573)

Metal, with sliding collar and wooden handle, accepts tubes 22- 32 mm.


TEST TUBE HOLDER   (2574)

Plated spring steel wire holder with finger grip. The jaws will accept tubes up to 40 mm. diameter and their alignment is maintained by a wire collar. Overall length 16 cm.


CRUCIBLE TONGS, WITH BOW   (2575)

Made of stainless steel.
Sizes : (a). 15cms and (b). 20cms



TONG MERCURY   (2576)

Nickel plated steel, for lifting globules of mercury. Length 20 cms. approx.


TONG BEAKER   (2577)

For the convenient and safe handling of beaker containing hot solutions and for pouring out the contents.
The jaws are asbestos covered to ensure firm grip. Overall length of tong 30 cms. approx. Made of stainless steel.


TONG BEAKER   (2578)

As above but jaws silicone covered.


TONG FLASK SAFETY   (2579)

Stainless steel, with asbestos lined rectangular jaws giving an extremely firm grip to flasks of any shape from 100- 2000 ml. capacity. Overall length of tong 30 cms. approx.


PIPETTE STAND   (2580)

Wooden and polished, to hold 12 pipettes horizontally. Height 23 cms. width 26 cms., and depth 12 cms.



FUNNEL STAND   (2581)

Made of seasoned hardwood, polished, with clamping screw. Rods are approx. 460x16 mm. Single base 200x110 mm. Double base 290x110 mm approx.
a) Single
b) Double


FUNNEL AND BURETTE STAND COMBINED   (2582)

Made of seasoned hardwood, polished, with clamping screws. Rod is approx. 460x16 mm.
Base size 290x110 mm. fitted with rubber feet, clamp with lined jaws and funnel holder slotted for ease of entry.



TEST TUBES STAND   (2583)

Made of seasoned wood. Can Accept 2 tubes of 25 mm. and 4 tubes of 16 mm. 6 vertical pegs for drying.


TEST TUBE STAND   (2584)

Made of seasoned hardwood, polished, with single row of holes. Vertical pegs are provided for quick drying of the test tubes.
a. For Six Test Tubes, with Six pegs, two holes of 32mm. diameter and four holes of 22mm. diameter.
b. For Twelve Test Tubes, with twelve pegs, two holes of 32mm. diameter and ten holes of 22mm. diameter.


TEST TUBES STAND   (2585)

Made of aluminium, made from thick 18 gauge aluminium sheet and anodized, fabricated in three tier. For 24 tubes.


BURETTE CLAMP, FISHER TYPE   (2586)

To hold single burette. Provided with a positive grip and release. Comprising lightweight but mechanically strong body with brass chrome plated jaws. Rubber covered having spring action which effects positive grip. A single thumbscrew secures the clamp to rod of nominal 13-mm. diameters. The clamp frame surface is finished with gray color.



BURETTE CLAMP, FISHER TYPE   (2587)

Same as above, but to hold two burettes.


BURETTE STANDS   (2588)

Made of seasoned hardwood, polished, with plastic clamping screws. Rods are approx. 460 x 16 mm. Single base 200 x 100 mm. Double base 290 x 110 mm.
a. Burette stand, Hardwood, Single. K
b. Burette stands, Hardwood, Double. L



‘U’ TUBE   (2589)

For the visual observation of the migration of coloured ions. Comprises central loading tube with funnel attached to a 'U' tube and two carbon electrodes with screw terminals.
Sizes 19.5cms. height and 6.5cms width.


CENTRIFUGE TUBE   (2590)

Conical plain, made of borosilicate glass.
Capacity (ml) : 10, 15, 50



CENTRIFUGE TUBE   (2591)

Conical graduated, made of borosilicate glass.
Capacity (ml) : 10, 15, 50


CULTURE TUBES   (2592)

Round bottom with screw cap and Teflon liner.


CORK, STOPPER, BARK   (2593)

Size No.Top (mm)Bottom (mm)Length (mm)
00006413
0008513
010713
111816
213918
3141019
4161121
5171322
6191424
7211525
8221627
9231828
10251931
11272131
12282231
13302431
14312531
15332731
16352931
17363038
18383138
19393338
20413438
22443838
24474038
26514438


RUBBER STOPPER   (2594)

Solid, superior quality rubber resistance to acid, alkali and ammonia.
Size No.Top (mm)Bottom (mm)Length (mm)
013915
1141118
2161320
3191421
4211522
5221723
6242024
7262127
8262127
9282131
10302633
11333033
12343034
13383137
14413242
15433440
16453536
17494040
18534833
19584445
20605156


RUBBER STOPPER TWO HOLE   (2595)

Mixed Pack containing sizes as follows. 8 each No. 2, 3, 4, 5, and 6 nos. each of 7, 9 and 3nos. each of 10, 11. Pack of 50.



RUBBER STOPPER ONE HOLE   (2596)

Mixed Pack containing sizes as follows. 7 each No. 0, 1, 2, 3, 4, and 3 nos. each of 5, 7, 9, 10, 11. Pack of 50.


RUBBER STOPPER SILICONE   (2597)

Translucent, highly elastic, odorless, suitable for use over a temperature range - 50 to 250ºC. can be sterilized by steam or by hot air.
Size No. Top (mm) Bottom (mm) Length (mm)
9 11 9 20
11 14 11 24
13 16 13 24
15 18 15 24
17 20 17 26
18 21 18 26
19 22 19 28
23 25 23 28
25 28 25 28
27 31 27 32
29 33 29 32
31 36 31 35
33 38 33 38


SUBA SEAL STOPPERS   (2598)

Rubber, autoclavable with turn over flange and serrations.

abcd
For Test Tube O.D. (mm)12151825


SUBA SEAL STOPPERS   (2599)

Rubber, autoclavable with turn over flange, plain.

abcd
For Test Tube O.D. (mm)12151825


CLIPS MOHR’S 2600   (2600)

Nickel plated, made of iron, good quality for schools.


CLIPS MOHR’S   (2601)

Nickel plated, made of brass, thick quality


CLIPS MOHR’S   (2602)

Pinch cock, nickel plated iron, flat jaws for compressing flexible tubing


CLIPS HOFFMAN’S   (2603)

Nickel plated steel, with projection plate to prevent damage to tubing by and of screw, with hinged bottom bar for direct fitting and removed without access to ends of tube. As above, but made of Brass.


CORK BORERS, BRASS   (2604)

Nickel- plated finish. Cutting tube mounted with safety under- flange in shaped handle ensuring a dislodged tube cannot injure that operator.  With iron rod for cleaning borers.
a) Set of 6 size 4 - 10mm
b) Set of 12 size 4 - 18mm
c) Set of 18 size 4 - 27mm



CORK BORERS, BRASS   (2605)

As above, but extra superior quality.
a) Set of 6 size of 4 - 10mm
b) Set of 12 size of 4 - 18mm
c) Set of 18 size of 4 - 27mm.


CORK BORER, SHARPNER   (2606)

Plated metal cone with hinged cutter blade set in slot and metal handle. Borer restored to circular shape by cone, edge cut to correct angle by depressing blade using thumb pressure.
For borer diameters 4-27 mm.



CORK BORING MACHINE   (2607)

For drilling uniform and straight holes in cork or rubber stoppers. Cast - iron frame with wood platform 10 cm. diameter to support work and adjustable guide rod, central hole through wheel spindle for ejector rod and introduction of lubricant (water or methylated spirit).
Complete with set of 12 nickel- plated borers cutting sizes from 7 to 25 mm.


CORK PRESS   (2608)

Cast iron, for softening corks evenly, by rolling, without increasing the porosity. To accommodate corks up to 32-mm. diameters. On wooden base.


BLOW PIPE   (2609)

Mouth, nickel-plated brass, with nipple. Size (cm) : (a) 20 and (b) 30


CHARCOAL BLOCKS   (2610)

Made from fine quality compressed charcoal.
Size 25-mm. square sections and 100 mm. Pack of 10 pieces.


HOFFMANN VOLTAMETER   (2611)

For demonstration of the decomposition of water, determination of chemical composition by electrolysis and with applications in the evaluation of the electro chemical equivalent of hydrogen. For the electrolysis of water, platinum electrodes are used and for the electrolysis of ammonia or hydrochloric acid carbon electrodes are used. The electrodes, available separately, are mounted in rubber stopper for insertion into the open ends of the VOLTAMETER limbs. This method, in addition to being convenient, obviates the use of fragile connections, such as platinum wire loops fused through the limbs. The glass unit has two connected limbs, each of approximately 50 ml. capacity, integral with reservoir tube and funnel shaped bulb, with a stopcock at the top of each limb for use on 12Volt D.C. supply.
 a) Voltameter, glass unit only, graduated, each limb 0 to 50x0.2 ml. but without stand.
i) Neutral glass
ii) Borosilicate glass.
b) Metal stand with mounts for giving support to cross limb and vertical limbs for above.
c) Carbon electrodes, in rubber stoppers approx. 110mm. long in protection tube.
d) Pair of platinum electrodes with rubber stopper and protection tube.
e) Power supply 12Volts DC


TUBING SODA GLASS   (2612)

Supplied in length of 0.5 meter approx. Pack of 30


TUBING NEUTRAL GLASS   (2613)

Neutral glass, light wall, heat and chemical resisting. Supplied in length of 0.5 meter approx. Pack of 30.


TUBING CORNING GLASS   (2614)

Corning glass, light wall, length of 1.5 meter, ±25 mm.


TUBING CAPILLARY   (2615)

Soda glass. Supplied in length of 0.5 meter approx. Pack of 10.



GLASS RODS   (2616)

Dia. 4mm to 10mm.



TUBES COMBUSTION   (2617)

Borosillicate glass, open both ends. For oxidisation and reduction of chemical substances. Length 30cms.



TUBES COMBUSTION, NUFFIELD   (2618)

With short glass tube fused to one end to enable the collection of reacting gases. Suitable for the reduction of metal oxides with hydrogen. Dimension 150 mm. length and 15 mm diameter.


TUBING RUBBER RED   (2619)

Extra soft quality, conforms to standard specifications, resistant to acids, alkalis. Pack of 10 meters.



TUBING RUBBER RED   (2620)

Ordinary pressure, extra soft thickness, conforms to standard specifications.


TUBING RUBBER RED/BLUE/GREEN   (2621)

High pressure, extra soft quality, conforms to standard specifications.


TUBING RUBBER SILICON   (2622)

Highly elastic, non- toxic, heat resistance from -50ºC to 250ºC repeatedly autoclavable, flexible odorless and transparency of the tubes allows visibility of the flowing fluid.



TUBING LATEX   (2623)

Seamless, translucent very flexible, suitable for connections to glass. Length 92cms.



TUBING PVC   (2624)

Transparent, strong, very flexible, suitable for connections to tape.


TUBING CONNECTOR   (2625)

Made of glass. Three way T- Shape, Y-Shape, U-Shape, riffled end for rubber tubing, outside diameter 8 mm. Available in polypropylene also.


TUBING CONNECTOR   (2626)

Made of polypropylene. Three way Y- shape, riffed end for rubber tubing. 8 mm. outside diameter. Available in glass also.


GAS TAPS   (2627)

Made of brass, lever handle, spring loaded, locking arrangement to ensure rotation does not go beyond 90 Degree standard 3 mm. bore, inlet 1/4 inches BSP, flange dia. 54 mm. with three screws to fix on bench or any other surface. Designed to operate at pressure upto 2 psi ( 0.14 kg/ cm2 ) suitable for town gas supply or bottled LPG., elegant design, painted with special scratch and chemical resistant paint / chrome plated.
A . One way
B. Two way
C. Three way
D. Four way


WATER TAP, SWAN NECK   (2628)

Made of brass, chrome finish, inlet tail is threaded 1/2 inch. BSP outlet tube is made out of 15 mm. brass tubing which is coupled to the tap standard by means of a sleeve not allowing the neck to swivel or be locked in a desired position. Leakproof operation, bench mounting.
A. Single way
B. Two way
C. Three way
.


WATER TAP, WALL TYPE   (2629)

Made of brass, chrome finish, inlet tail is threaded 1/2 inch. BSP leakproof operation, suitable for wall mounting.
A. Two way
B. Three way


PAPER TEST LITMUS   (2630)

NICE- make, for Colleges. Supplied in plastic case of 10 books each with 20 leaves of size 63.5 x 10 mm. wide approx. Total 200 leaves.
Colour : Red and Blue



LITMUS TEST PAPER   (2631)

GEM- make, for Colleges, Universities, extra superior quality. Supplied in box of 5 books each with 20 leaves of size 63.5 x 10mm. wide approx. Total 100 leaves.
Colour : Red and Blue


PAPER TEST-pH   (2632)

Best make, for Colleges, Universities. Supplied in box of 5 books each with 20 leaves of size 63.5 x 10 mm. wide approx. Range pH 1 to 10 or 1 to 11. Total 100 leaves.
A. As above but pH range 10-20



pH INDICATOR PAPER DISPENSER   (2633)

Indicator paper supplied in plastic dispenser containing 5 meters of 8mm. wide test strip. A color chart is provided on the side of each dispenser. Full range covering from 1 to 10 pH in step of 1pH.



pH INDICATOR PAPER DISPENSER   (2634)

Same as above, but pH range 10-14.



PAPER TEST   (2635)

EKI- make, Cobalt Chloride. Supplied in plastic case of 5 books each with 20 leaves. Total 100 leaves.



COMPARATOR INDICATOR   (2636)

Box of ten books of twenty leaves 65x10mm. Color- matching charts are printed on the cover of each book.
Specific Range:
a) 2.0 to 4.5 pH.
b) 3.5 to 6.0 pH.
c) 5.0 to 7.5 pH
d) 6.5 to 9.0 pH
e) 8.0 to 10.5 pH
Wide Range:
f)  2.0 to 10.5 pH
g) Multi Range contains each of above 6 ranges.
Full Range:
h) 1.0 to 14.0 pH.



LENS CLEANING TISSUE PAPER   (2637)

Size 9 x 14.5 cms. Pack of 100 leaves.



LABEL BOOKS   (2638)

For laboratory, stickers pack of 130, self- adhesive. Size 55 x 30 mm. With name of chemicals and reagents commonly used in laboratory.


SPATULA HORN   (2640)

Double ended, flat blades.
Length (cms) : (a) 12.5 (b) 15 (c) 20


SPATULA STAINLESS STEEL   (2641)

One end flat and the other end spoon form.
Length (cms): (a) 12.5 (b) 15 (c)20


SPATULA STAINLESS STEEL   (2642)

Double ended, flat blades. Length (cms) : (a) 12.5 (b) 15 (c) 20


SPATULA STAINLESS STEEL   (2642-A)

With wooden handle. S.S blade.



DISTILLING TUBE PLAIN   (2643)

Total Length is 200 mm. and Outer Dia. of Tube is 15 mm.



DISTILLING TUBE   (2644)

With one Bulb. Total Length is 250mm. and Outer Dia. of 17 mm. and of Bulb is 40 mm.



DISTILLING TUBE   (2645)

With two Bulbs. Total Length 300mm. and Outer Dia. of Tube 17mm. and of Bulb is 40 mm.



DISTILLING TUBE   (2646)

With three Bulbs. Total Length 400mm. Outer Dia. of Tube 17mm. and of Bulb 40 mm.



VAPOUR DENSITY APPARATUS, VICTOR MEYER’S   (2647)

For the vapour density determination of volatile liquids by measuring the volume of air displayed by a known mass of the substance when vaporized. Comprises 100-ml. bulb with a long vaporizing tube fitted with a side delivery tube incorporati ng a safety rod, designed to support a vapour density bottle and contents before introduction into the tube, by rotating the rod. An outlet jacket surrounds the vaporizing tube. Supplied with vapour density bottle.


FILTER PAPER   (2648)

Student’s quality. General purpose for use in schools. Pack of 100 circles.

Diameter (cms)
 ABCDEFGH
911.512.5151821.52224


FILTER PAPER   (2649)

As per WHATMAN No. 1. A widely used, general-purpose filter paper. Medium retention and flow rate. Pack of 100 circles.
 ABCDEFG
Diameter (cms)91112.51518.521.524



FILTER PAPER   (2650)

As per  WHATMAN No. 1. Pack of 100 circles.
  A B C D E F G
Diameter (cms) 9 11 12.5 15 18.5 21.5 24



SHEETS, FILTER PAPER   (2651)

Size 45 x 45 cms. Pack of 500 sheets.



SHEETS   (2652)

Size 46 x 56 cms. Pack of 500 sheets



ASPIRATOR, BOTTLES   (2653)

With ground in stopper and tabulator Moulded soda glass.
  A B C D E
Capacity (Liters) 1 2 3 5 10


ASPIRATOR, BOTTLES   (2654)

With outlet for tubing. Moulded borosillicate glass.
 ABCD
Capacity :250ml500ml1 litre 2 litre


ASPIRATOR BOTTLES   (2655)

With outlet for stopper. Moulded borosillicate glass.
  Capacity(ml) Approx. O.D. (mm)s Approx. Height (mm)
A 100 104 200
B 2000 129 265
C 5000 190 320
D 10000 215 410


BOTTLES, BIJOU   (2656)

Media vaccine, narrow mouth with aluminium screw cap and rubber linear.
Capacity (ml) : (A) 7 and (B) 14


BOTTLES, Mc Cartney   (2657)

Media vaccine, narrow mouth with aluminium screw cap and rubber liner, Capacity 28 ml.



BOTTLES, DENSITY   (2658)

Spherical pattern, light blown corning glass, with flat bottom and perforated stopper.
  a b c d
Capacity (ml) 10 25 50 100


BOTTLES   (2659)

Gas Washing, Dreschsel’s, with interchangeable joint head B- 29, made of borosilicate glass.
  a b c
Capacity (ml) 125 250 500


BOTTLES WASH   (2660)

With interchangeable joint.



BOTTLES WEIGHING   (2661)

Ground in stopper.
  a b c d
O.D. x Ht. (mm) 40 x 30 50 x 25 50 x 35 50 x 50
Capacity (ml) 20 20 35 50



BRUSHES, CYLINDER   (2662)

Nylon head with fan shaped end, on galvanized wire.
  Head dia. x Length(mm) Overall Length(mm)
A 120 x 65 600
B 40 x 75 600



BRUSHES, TEST TUBE   (2663)

Bristle, on galvanized wire. Head size 65 x 40mm. Overall length 230 mm.



BRUSHES, TEST TUBE   (2664)

Tapered bristle with cotton tip, for tubes 19 to 25 mm. bore. Overall length 230 mm. on galvanized wire.



BRUSHES, BEAKER   (2665)

Bristle head, 150 mm long x 70-mm. diameters on hardwood handle. Overall length 400 mm.



BRUSHES, BOTTLE   (2666)

Bristle head on wire with wooden handle.
  Head Length x Dia(mm) Overall Length(mm) For Bottle Size(ml)
A 65 x 45 300 125
B 75 x 50 350 250
C 100 x 65 400 500
D 150 x 75 750 1000


BRUSHES, BOTTLE   (2667)

Nylon head on wire with wooden handle.
  Head Length x Dia(mm) Overall Length(mm) For Bottle Size(ml)
A 65 x 45 300 125
B 75 x 50 350 250
C 100 x 65 400 500
D 150 x 75 750 1000



BRUSHES, BOTTLE   (2668)

Bristle head on wire with wooden handle.
  Diameter(mm) Length(mm) Burette(ml)
A 13 500 10
B 16 600 25
C 19 750 50
D 25 900 100


FUNNEL FILTER   (2669)

Conical shape, soda glass, long stem.
ABCDE
Diameter (cms) :56.257.51012.515


FUNNEL FILTER   (2670)

Conical shape, soda glass, short stem.
ABCDEF
Diameter (cms)56.257.51012.515


FUNNEL FILTER   (2671)

Plain, 60 Degree angle, long stem, made of borosilicate glass.
  A B C D
Diameter (cms) 5 6.5 7.5 10


FUNNEL POWDER   (2672)

Short stem, made of Polypropylene.
  A B C D
Diameter (cms) 12.5 15 20 25


FUNNEL PORCELAIN   (2673)

Buchner, with straight sides above the perforated plate.
  A B C D E F G H I J
Diameter (cms) 3.5 5 6 7.5 10 12.5 15 20 25 30


FUNNELS BUCHNER   (2674)

Sintered glass, with flat sintered glass plate.< td>J
 ABCDEFGHIK
Porosity12312341 234
Capacity (ml)35353580808080125125125125
Plate Dia (mm)3030304040408065656565



FUNNELS HIRSCH   (2675)

Sintered glass, with flat sintered glass plate.
  A B C D
Porosity 1 2 3 4
Capacity (ml) 20 20 20 20
Plate Dia (mm) 20 20 20 20


FUNNELS DROPPING   (2676)

Cylindrical, with stopcock and interchangeable ground glass/plastic stopper, graduated, Borosilicate glass.
 ABCD
Capacity (ml)50100250500


PIPETTES GRADUATED, CLASS-B   (2683)

Made of Borosilicate glass, with permanent stained graduation. Colour-coded. Zero at jet.
Cap. x Graduation(ml) : A) 1 x 0.01 (B) 2 x 0.02 (C) 5 x 0.05 (D) 10 x 0.10 (E) 25x 0.20



PIPETTES SEROLOGICAL   (2684)

Calibrated for delivery to jet. Last drop expelled by blowing, permanent amber
graduation. Colour Coded.
Capacity x Graduation(ml) :
(a) 0.1 x 0.01 (e) 2.0 x 0.02
(b) 0.2 x 0.02 (f) 5.0 x 0.1
(c) 0.5 x 0.05 (g) 10.0 x 0.1
(d) 1.0 x 0.01 (h) 25.0 x 0.1




PIPTTES   (2685)

Disposable, Pasteur type, soda glass, without teat, in pack of 250.
Length (mm) : a)145 and (b)230



PIPETTES FOR MILK TESTING   (2686)

Made of Borosilicate glass, permanent amber graduation. Capacity 10.75 ml.



PIPETTES DROPPING   (2687)

Capacity 1.7 ml, approx., rubber teat, length 40 mm, 110 mm, overall. Pack of 10.
a) Narrow Mouth
b) Wide Mouth



PIPETTES DROPPING   (2688)

Glass body, length 12.5 cm, supplied with rubber teat. Useful for dispensing liquid from test tubes. Pack of 5.



PIPETTES CLASS- B   (2689)

Made of neutral glass, bulb form, single graduation on upper.Stem, permanent graduation.
  A B C D E F G H
Capacity (ml) : 2 5 10 15 20 25 50 100



PIPETTES CLASS- B   (2690)

Made of Borosilicate glass, bulb form, single graduation on upper stem, permanent amber stained graduation. Colour-coded.
  A B C D E F G H
Capacity (ml) : 2 5 10 15 20 25 50 100

Above pipettes with class-a accuracy are available.



PIPETTES CLASS-B   (2691)

Borosilicate glass, with permanent stained graduation. Color-coded. Zero at top.
Capacity x Graduation (ml)
A1 x 0.01
B2 x 0.02
C5 x 0.05
D10 x 0.01
E25 x 0.20


PIPETTE FILLER   (2692)

Rubber, pear shaped, for use with pipettes.
  A B C D E F
Capacity (ml) : 5 10 15 25 50 100


PIPETTE FILLER   (2693)

Bulb for pipetting noxious solutions, microbial suspensions and other harmful or unpleasant solutions. Comprise a bulb and three pinch valves controlling influx of pipette contents. Bulb diameter is 54 mm.
Colour : (A) Red  (B) Black  (C) Grey


FIXED VOLUME MICROLITRE PIPETTE   (2694)

A range of economic, accurate, fixed volume micro-pipettes. Models 2 mol 1000 ml They are fully autoclavable to 12º C.
  A B C D E F G H I J K L M
Capacity (ml) : 2 5 10 20 25 50 100 200 250 300 400 500 1000



MICRO PIPETTE CONTROLLER   (2695)

An economic, accurate, complete with rechargeable battery. Pipette adapter.


PIPETTE FILLER POLYETHYLENE   (2696)

Simple pipette filler for use with bulb and cylindrical pipettes up to 25 cm. Easy to use with finely adjustable thumb wheel, no possibility of sucking back. Ideal for bromine, acids and alkalis.
Capacity (ml) : (a) 10 and (b) 25



VARIABLE VOLUME MICROLITRE PIPETTE   (2697)

A range of economic, accurate. Variable volume micro- pipettes. Models 0.5 up to 5000ml They are fully autoclavable to 121ºC.
  A B C D E F G
Capacity (ml) : 0.5-2 1-10 2-20 10-100 20-200 200-1000 1000-5000


DROPPER WITH RUBBER TEA T   (2698)

Glass dropper with Teat in different sizes. plain and graduated.



GLOVES COTTON   (2699)

Knitted seamless to provide maximum work comfort and efficiency in all seasons. Neutral color, bleached white, regular size.


GLOVES DISPOSABLE (Surgical)   (2700)

For handling noxious material. Medium gloves for light duty, acid and alkali proof.
Size (per pair) : a) 10"

b) 12"

c) 14"


GLOVES RUBBER   (2701)

General purpose, medium weight gloves for light duty, acid and alkali proof.



LAB COATS   (2702)

Made of white drill/white polyester. Modern styling with concealed buttons, back vent and three large pockets. Length 100 cms.
Chest (cms) : (a) 96 and (b) 108


SAFETY GOGGLES   (2703)

Plastic, for eye protection. Can be used over normal spectacles.
A) With normal glasses.
B) As above but with dark glasses.


BEAKERS, GLASS   (2704)

Low form, with spout, made of soda glass, can be used up to 100ºC.< td>j
 abcdefghi
Capacity (ml)25501001502504005006008001000



BEAKERS, GLASS   (2705)

Tall form, with spout made of borosilicate glass.
  a b c d e f g h i j k l m
Capacity (ml) 5 10 25 50 100 150 250 400 500 600 1000 2000 3000


GRADUATED BEAKERS   (2706)

All Beakers offered are of nominal capacity and graduation mark showing approximate capacities can be supplied at an extra cost. Beakers made of borosilicate glass are equivalent to Pyrex/Corning in quality and durability.< td>j
 abcdefghi
Capacity (ml)25501001502504005006008001000


FLASK BOILING   (2707)

Round bottom, short neck, wide mouth, made of soda glass.
  a b c d e
Capacity (ml) 100 150 250 500 1000



FLASK BOILING   (2708)

Round bottom, long neck, made of soda glass.
  a b c d
Capacity (ml) 100 150 250 500



FLASK BOILING   (2709)

Round bottom, short neck, made of borosilicate glass.

Capacity (ml)
 ABCDEFGH
255010015025050010002000


FLASK BOILING   (2710)

Round bottom, long neck, made of borosilicate glass, interchangeable joint.
 ABCDEF
Capacity (ml)5010025050010002000
Interchangeable19/26< /td>24/2924/2924/2924/2924/29
Height (mm)95120140160188228


FLASK BOILING   (2711)

Pear shaped, short neck, made of borosilicate glass, with interchangeable joint.
  A B
Capacity (ml) 25 50
Interchangeable 14/23 14/23



FLASK BOILING, FLAT BOTTOM   (2712)

Long neck, made of soda glass, vial mouth.
  A B C D E
Capacity (ml) 100 150 250 500 1000



FLASK, BOILING   (2713)

Florence, flat bottom, made of borosilicate glass.< td>J
 ABCDEFGHIK
Capacity (ml)2550100150250300500100020003000 5000



FLASK, BOILING   (2714)

Flat Bottom, short neck, made of borosilicate glass, interchangeable joint.
 ABC
Capacity (ml)150250500
Interchangeable24/2924/2924/29
Height (mm)115130148


ROUND BOTTOM FLASK, TWO NECKS   (2715)

One center neck and one parallel side neck
Capacity: 250ml to 20000ml



ROUND BOTTOM FLASK, TWO NECKS   (2716)

One center neck and one angular side neck
Capacity: 100ml to 20000ml


FLASK, THREE NECK   (2717)

All necks parallel. Capacity: 250ml to 20000ml


FLASK, THREE NECK   (2718)

One center neck and two angular side necks. Capacity: 100ml to 20000ml



FLASK, FOUR NECK   (2719)

Round bottom flask with four necks.
Capacity: 500ml to 20000ml
Size of the centre socket, side sockets (angular or parallel) on demand



BULBS, TEAT   (2720)

Rubber for use with dropper pipettes.
ABC
CapacitySmallMediumLar ge


BURETTES   (2721)

Made of neutral glass, with Mohr clip, glass jet and rubber using.
 AB
Capacity : 25 x 0.150 x 0.1



BURETTES   (2722)

Made of neutral glass, with single bore glass stopcock.
  A B
Capacity : 25 x 0.1 50 x 0.1


BURETTES, CLASS- B   (2723)

Made of borosillicate glass, with single bore glass stopcock. Conforms to BS 846.
  A B
Capacity : 25 x 0.1 50 x 0.1



BURETTES, CLASS- B   (2724)

Made of borosillicate glass, with single bore Rotaflow stopcock. Conforms to BS 846.



BURETTES, CLASS- B   (2725)

Made of borosillicate glass, with single bore PTFE KEY, screw type.
  A B
Capacity : 25 x 0.1 50 x 0.1



BURETTES, AUTOMATIC, CLASS- B   (2726)

borosillicate glass, with internal filling tube and automatic zero. Fitted with Rotaflow stopcock.
 Capacity (ml)Graduation Tolerance (ml)
A100.10.1
B250.10.1
C500.10.1



FLASK IODINE   (2727)

These flasks are blown specially for iodine value determination. The stopper handle projects above liquid seat trough to facilitate its removal, with interchangeable stopper.
 ABC
Capacity (ml)100250500
Interchangeable24/2924/2924/29


FLASK KJELDHAL   (2728)

Long neck, round bottom, borosilicate glass. These flasks specially styled for nitrogen determination as per KJELDHAL method are provided with tooled necks for extra strength and stopper fit.
 ABCDEF
Capacity (ml) : 1030100300500800



FLASK KJELDHAL   (2729)

As per Srl. No. 6192 but with interchangeable joint.
 AB
Capacity (ml)500800
Interchangeable24/2924/29



FLASK VOLUMETRIC   (2730)

With interchangeable plastic stopper. Accuracy as per Class-B of IS 915: 1975. Made of borosilicate glass.Capacity (ml)
 ABCDEFGH
255010020025050010002000
Interch angeable10/1510/1514/1514/1514/1519/2019/2024/25



FLASK VOLUMETRIC   (2731)

With interchangeable glass stopper. Accuracy as per Class-B of Is 915: 1975. Made of borosilicate glass.< td>J
 ABCDEFGHI
Capacity (ml)510255010020025050010002000
Interchangeable10/1510/1510/1510/1510/1514/1514/ 1519/2019/2024/25



FLASK (Vessel)REACTION   (2732)

Flanges, wide mouth, OD 150mm, ID 100mm.



LIDS FOR REACTION FLASK   (2733)

Flat flange, inter-changeable joint OD 150mm, ID 100mm.


CLIP FOR HOLDING   (2734)

Flat flange joint 100mm.


FLASK, DISTILLING   (2735)

Round bottom, with side arm, borosilicate glass.
 ABCDE
Capacity (ml) : 10025050010002000



FLASK CONICAL   (2736)

Erlenmeyer, narrow neck, made of soda glass.
  A B C D E F
Capacity (ml) : 50 100 150 250 500 1000



FLASK CONICAL   (2737)

As per Srl. No. 6183 but graduated. Graduation marks approximate.
 ABCDEF
Capacity (ml) : 501001502505001000



FLASK CONICAL   (2738)

Erlenmeyer, narrow mouth, made of borosilicate glass.Capacity (ml) :
 ABCDEFGH
1025501001502505001000



FLASK CONICAL   (2739)

Erlenmeyer. wide mouth but graduated. Graduation marks approximate.


FLASK CONICAL WITH SCREW CAP   (2740)

Erlenmeyer,  Graduation marks approximate.
  A B C D E F G H
Capacity (ml) : 10 25 50 100 150 250 500 1000


FLASK CONICAL   (2741)

Erlenmeyer, narrow mouth, made of borosilicate glass, with interchangeable stopper.
  A B C D E
Capacity (ml) 25 50 100 250 500
Interchangeable 14/23 19/26 24/29 29/32 29/32



FLASK FILTERING   (2742)

Conical, made of soda glass, with integral side arm.
  A B C D
Capacity (ml) : 100 250 500 1000



FLASK FILTERING   (2743)

Conical, made of borosilicate glass, with integral side arm.
 ABCDEF
Capacity (ml) : 5010025050010002000


FUNNELS DROPPING   (2744)

Cylindrical, with screw type PTFE Key, Rotaflow stopcock, Interchangeable ground glass / plastic stopper, graduated, Borosilicate glass.
  A B C D
Capacity (ml) : 50 100 250 500



FUNNELS DROPPING   (2745)

Cylindrical, stopcock & interchangeable stopper, ungraduated, Borosilicate glass.
 ABCD
Capacity (ml) : 50100250500


FUNNELS SEPARATING, SQUIBB   (2746)

With interchangeable ground glass/plastic stopper and stopcock, made of Borosilicate glass.
 ABCD
Capacity (ml) : 1002505001000



FUNNELS SEPARATING, SQUIBB   (2747)

With interchangeable ground glass/plastic stopper and screw type, Rotaflow stopcock, made of Borosilicate glass.
  A B C D E
Capacity (ml) : 50 100 250 500 1000



FUNNELS SEPARATING, SQUIBB   (2748)

With interchangeable ground glass/plastic stopper. PTFE Key stopcock made of Borosillicate glass.
  A B C D E
Capacity (ml) : 50 100 250 500 1000



FUNNELS SEPARATING, PEAR SHAPED   (2749)

With interchangeable ground glass/plastic stopper and screw type, Rotaflow stopcock, made of Borosilicate glass.
  A B C D E
Capacity (ml) : 50 100 250 500 1000



FUNNELS SEPRATING, PEAR SHAPED   (2750)

With interchangeable ground glass/plastic stopper and screw type, Rotaflow
stopcock, made of Borosilicate glass.
 ABCDE
Capacity (ml) : 501002505001000



FUNNELS SEPARATING, PEAR SHAPED   (2751)

With interchangeable ground glass / plastic stopper and screw type PTFE Key stopcock, made of Borosilicate glass.
 ABCDE
Capacity (ml) : 501002505001000


FUNNEL THISTLE   (2752)

Short stem, stout walled and drawn off to small diameter for filling burettes, barometer tubes, manometer etc.



FUNNEL THISTLE   (2753)

Stout walled, made of neutral glass. Also available in Borosilicate glass.
 ABC
Stem Length (mm):200250300



FUNNEL THISTLE SAFETY   (2754)

With bend and safety bulb, made of neutral glass, length of stem 300 mm.


GAS JARS CYLINDRICAL   (2755)

Glass with ground flange, without lid and heavy foot.< td>J< td>Diameter (cms) :
 ABCDEFGHI
Height (cms) : 15202530202530152025
55557.57.57.5101010



GAS JARS COVERS   (2756)

Circular, sheet glass, ground one side.
  A B C D E
Diameter (cms) : 5 6.5 7.5 9 10


FILTER PUMP   (2758)

A moulded polypropylene filter pump with limited water consumption and built in non water returnable valve. Maximum vacuume produced is 15mm Hg (980kPa) removable down tube. Overall length 195mm, length of down tube 85mm, inlet tube dia. 12mm, vacuume nozzle tapers from 9 to 11mm.


CYLINDERS MEASURING GRADUATED   (2759)

Soda glass. with spout and glass foot.
 ABCDEF
Capacity (ml)25501002505001000
Graduation0.51 .01.02.05.010.0



CYLINDERS MEASURING GRADUATED   (2760)

Borosillicate glass, with spout and glass foot.
  A B C D E F G
Capacity (ml) 25 50 100 250 500 1000 2000
Graduation 0.5 1.0 1.0 2.0 5.0 10.0 20.0



CYLINDERS MEASURING GRADUATED   (2761)

Borosillicate glass, with spout and detachable plastic hexagonal base.
 ABCDEF
Capacity (ml)102550100250500
Graduation0.20.5 1.01.02.05.0


CYLINDERS MEASURING GRADUATED   (2762)

Borosillicate glass, with spout and glass foot. Complete with interchangeable glass or polypropylene stopper.< /tr>
 ABCDEFGHI
Capacity (ml) : 510255010025050010002000
Gr aduation : 0.10.20.51.01.02.05.010.020.0



DESICCATOR   (2763)

Knob lid pattern, Heavy Soda glass with knob cover, accurately ground top and rim.
  A B C
Diameter (cms) : 15 20 25
Graduation : 0.1 0.2 0.5



DESICCATOR PLATES   (2764)

Perforated and good quality, to fit diameter of Desiccators.
  A B C
Zinc 15 20 25
Porcelain 15 20 25
Stainless Steel 15 20 25


DESICCATOR   (2765)

Borosillicate glass, with knob cover, accurately ground top and rim.
  A B C D
Diameter (cms) : 11 16 20 25



DISHES PETRI   (2766)

Soda glass, with Fire polished edges. School quality.
  A B C D E F
Diameter (cms) : 5 7.5 9 10 12.5 15


DISHES PETRI   (2767)

Borosillicate glass Can with stand wet or dry repeated sterilization. The edges are beaded to provide greater mechanical strength.
 ABCDE
Outer Dia x Height (mm) : 50 x 1780 x 17100 x 17150 x 20200 x 20


DISHES PETRI   (2768)

Transparent plastic, Crystal Clear, disposable. Ridges prevent base from sticking, can be autoclaved repeatedly.
  A B C D
Diameter (cms) : 5 7.5 10 12.5


STANDARD JOINT AND SOCKET   (2769)

Cat No. Joint Size
a. B16
b. B19
c. B21
d. B23
e. B26
f. B29
g. B32
h. B35
i. B45
j. B50.
k. B42
l. B44


SOCKET PLAIN DOUBLE   (2770)

Cat No. Joint Size Shank Length mm
a. B7 80
b. B10 80
c. B14 80
d. B19 80
e. B24 80
f. B29 80
g. B34 100
h. B40 100


CONES PLAIN END DOUBLE   (2771)

Cat No. Joint Size Shank Length mm
a. B7 80
b. B10 80
c. B14 80
d. B19 80
e. B24 80
f. B29 80
g. B34 100
h. B40 100


SPHERICAL JOINTS BALL AND CUP   (2772)

Cat No. Joint Size
a. S13
b. S19
c. S29
d. S35
e. S41



REDUCTION ADAPTERS   (2773)

 
Cat No.Socket SizeCone Size Cat No.Socket SizeCone Size
AB10B14 OB24B50
BB14B19 PB24B55
CB14B24 Q B29B34
DB14B29 RB29B40
EB14B24 SB29B45
FB19B29 TB34B40
GB19B34 UB34B45
HB19B40 VB34B50
IB19B45WB34B55
JB19B55 XB40B55< /td>
KB24B29 YB34B60
LB24B34 ZB34B75
MB24B40 ZZB34< /td>B100
NB24B45    


EXPANSION ADAPTERS   (2774)

D< td>B34B55
Cat No.Socket SizeCone Size Cat No.Socket SizeCone Size
A

B14

B10 OB55B19
BB19B14 PB40B24
CB24B14 QB45B24
B24B19 RB50B24
EB29B14 < /td>SB55B24
FB29B19 TB45B29
GB29B24 UB50B29
HB34B19  VB55B29
IB34B24 WB40
JB34B29 XB45B34
KB40< /td>B29 YB50B34
LB40B19 ZB34
MB45B19 ZZB55B40
N< /td>B50B19    


MULTIPLE ADAPTERS   (2775)

With two parallel necks.
Cat No. Socket Size Cone Size   Cat No. Socket Size Cone Size
A B10 B10   F B19 B34
B B14 B14   G B24 B34
C B19 B19   H B19 B55
D B19 B24   I B29 B29
E B24 B24   J B34 B34


MULTIPLE ADAPTERS   (2776)

With two necks at 45º angle.
Cat No. Socket Size Cone Size
A B19 B19
B B19 B24
C B19 B34



MULTIPLE ADAPTERS   (2777)

With three necks, two parallel and one at 45º angle.
Cat No. Socket Size Cone Size Angled Neck
A B14 B19 B14
B B19 B24 B14
C B19 B24 B19
D B19 B29 B19
E B19 B34 B19
F B19 B55 B19
G B24 B34 B24
H B24 B24 B24


MULTIPLE ADAPTERS   (2778)

With swan neck.
Cat No.Socket SizeCone Size
AB14B14
BB19B19
CB19B24
DB24B19
EB24B24
FB24 B34


RECEIVER ADAPTERS   (2781)

Plain bends Short/Long
Cat No. Socket Size   Cat No. Socket Size Cone Size
A B14   F   B40
B B19   G   B45
C B24   H   B50
D B29   I   B55
E B34        


RECEIVER ADAPTERS   (2782)

With plain bends.
Cat No.Socket SizeCone Size
AB19B19
BB19B24
CB24B24
DB34B34


RECEIVER ADAPTERS   (2783)

With straight delivery.
Cat No. Socket Size
A B19
B B19
C B24
D B29
E B34


RECEIVER ADAPTERS   (2784)

Bends with vents.
Cat No. Socket Size Cone Size
A B10 B10
B B14 B14
C B19 B19
D B19 B24
E B24 B24
F B29 B29
G B34 B34


RECEIVER ADAPTERS   (2785)

Bends with vacuum connection.
Cat No.Socket SizeCone Size
AB14B14
BB19B19
CB19B24
DB24B24
EB29B29
FB34B24
GB34B34



RECEIVER ADAPTERS   (2786)

Straight with vacuum connection.
Cat No.Socket SizeCone Size
AB19B19
BB19B24
CB24B24
DB34B34


RECEIVER ADAPTERS   (2787)

Bends with socket connection.
Cat No.Socket SizeCone Size
AB14B14
BB19B19
CB19B24


RECEIVER ADAPTERS   (2788)

Bends with multiple connection, (pig).
Cat No.Socket SizeCone Size
AB10B10
BB14B14
CB19B14
DB19B19


PERKIN INTERMEDIATE RECEIVER ADAPTER   (2789)

< td>C
Cat No.Socket SizeCone SizeMinimum Capacity ml
AB14B1410
BB19B1932
B19B2432
DB24B2432
EB34< /td>B24 
FB34B34 



VACUUM RECEIVER ADAPTERS   (2790)

To take 3x100ml flasks. Socket Size: B19, Cone Size: B19


RECOVERY BENDS, ELBOW   (2791)

Cat No.Size of Cone Fitting Flask or columnSize of Cone Fitting Condenser
AB14B14
BB24B14
CB19 B19
DB24 B19
EB29 B19
FB34 B19
GB24 B24
HB34 B24
IB34 B34
JB55B24
KB29 B29
LB55 B55
MB55B34


RECOVERY BENDS, VERTICAL   (2792)

Cat No. Size of Cone Fitting Flask or column Size of Cone Fitting Condenser
A B14 B14
B B19 B19
C B24 B19
D B24 B24
E B34 B34


THERMOMETER POCKETS   (2793)

To fill all standard Still Heads.
Cat No.Cone Size
AB14
BB19
CB24


THERMOMETER POCKETS   (2794)

Long type sealing to length required.
Cat No.Cone Size
AB10
BB14
CB19
DB24
EB34



AIR LEAK TUBE   (2795)

Cat No. Cone Size
A B14
B B19
C B24
D B34


STILL HEAD PLAIN WITH THERMOMETER POCKET   (2796)

< tr>B14L
Cat No. Socket SizeCone SizeCone Size
AB10B10B10
BB14B14B14
CB14B19B19
DB14B24B19
EB29B19
FB14B36B19
GB14B 24B24
HB14B34B24
IB14B55B24< /td>
JB14B29B29
KB14B34B34
B24B24B24
MB24B55B34
NB24 B55B34


CLAISON HEAD SLOPING   (2797)

With 2xB14 Sockets
Cat No. Cone Size Cone Size
A B14 B14
B B19 B19
C B24 B19
D B34 B19
E B24 B24
F B34 B24
G B29 B29


SPLASH HEAD SLOPING (Pear Shape)   (2798)

Cat No. Size of Cone Fitting
Flask or column
Size of Cone Fitting
Condenser
A B19 B19
B B24 B19
C B34 B19
D B34 B24
E B24 B24
F B29 B29
G B34 B34


SPLASH HEAD SL OPING (Pear Shape)   (2799)


Cat No. Size of Cone Fitting
Flask or column
Size of Cone Fitting
Condenser
AB19B19
BB24B19
C B34B19
DB24B24
EB34B24


STEAM DISTILLATION HEAD   (2800)

Pear shape sloping.
Cat No. Cone Size Cone Size
A B24 B19
B B34 B19
C B34 B24



STEAM HEAD ADAPTERS   (2801)

Cat No.Socket SizeCone Size
AB19B24


SPLASH HEAD SLOPING (Pear Shape)   (2802)

Adapter cone to rubber tubing, right connection.
Cat No. Cone Size
AB10
BB14
CB19
D B24
EB29
FB34


ADAPTER CONE   (2803)

Adapter cone to rubber tubing, right connection.
Cat No. Cone Size
A B10
B B14
C B19
D B24
E B29
F B34


ADAPTER WITH SOCKET   (2804)

Right angle or straight connection.
Cat No. Cone Size
AB14
BB19
CB24
D B29
EB34


ADAPTER SOCKET   (2805)

Adapter socket to rubber tubing, right angle or straight connection.
Cat No. Cone Size
A B14
B B19
C B24
D B29
E B34


STOPCOCK ADAPTER SOCKET   (2806)

Stopcock adapter socket to rubber tubing, right angle or straight connection.
Cat No. Cone Size
A B14
B B19
C B24
D B29
E B34


STOPCOCK ADAPTER SOCKET/CONE   (2807)

Cat No. Cone Size Socket Size
A B24 B19
B B24 B24
C B24 B34


ADAPTER CONE WITH STEM   (2808)

Adapter cone with stem to rubber tubing, right angle connection.
Cat No. Cone Size
A B14
B B19
C B24
D B34


ADAPTER SOCKET TO CONE WITH 'T' CONNECTION   (2809)

Cat. No. Cone Size Socket Size
A B10 B10
B B14 B14
C B19 B14
D B24 B14
E B19 B19
F B24 B19
G B29 B19
H B34 B19
I B24 B19
J B29 B24
K B29 B29
L B34 B34


VACUUM CONTROL STOPCOCK   (2810)

Cone Size: B19



VACUUM RELEASE STOPCOCK   (2811)

Cone Size: B19



DRYING TUBES   (2812)

Cat. No.Cone Size
AB10
BB14
CB19
DB24
EB29
FB34


TEST TUBE WITH SOCKET WITHOUT STOPPER   (2813)

< /table>
Cat. No.Socket SizeDia. mmOverall LengthCapacity approx.
AB10B14642
BB10B1410 05
CB12B1610010
DB14B18 10014
EB14B1812515
FB14B 1815019
GB19B2210019
HB19B2215031
IB24B2815054
JB24B2820075
KB34B40250195

STOPPER HOLLOW   (2814)

Cat. No.Cone SizeShape
AB10Hexagonal
BB14Hexagonal
CB19Hexagonal
DB24Hexagonal
EB19 Hexagonal
FB24Hexagonal
GB29Hexagonal
HB34Hexagonal
IB24Penny Head
JB29Penny Head
KB29Penny Head
LB34Penny Head



STOPPER SOLID (Penny or Flat Head)   (2815)

Cat. No.Cone Size
AB10
BB14
CB19
DB24
EB34
FB29


ABSORPTION TUBES, STRAIGHT   (2816)

Straight from soda glass with one bulb.< td>C
 LENGTHDIA.
A100mm12mm
B150mm20mm
200mm25mm



ABSORPTION TUBES, U-FORM   (2817)

U form, soda glass with strong walls.
  LENGTH DIA.
A 100mm 12mm
B 125mm 15mm
C 150mm 20mm



CALCIUM CHLORIDE TUBE, U-FORM   (2818)

Corning Glass with side tubes.< td>C
 LENGTHDIA.
A100mm12mm
B125mm15mm
150mm20mm


ABSORPTION TUBES, U-FORM STOPPERED   (2819)

Corning glass with side tubes. Limbs closed by hollow ground-in key stoppers, which when rotated, open or seal the side tubes.< td>C
 LENGTHDIA.
A100mm12mm
B125mm15mm
150mm20mm



AIR CONDENSERS   (2820)

Borosil glass, Plain tubes 12mm. approx. outside diameter, with funnel top 23mm. approx. outside diameter.
ABCD
Total Length(cm) :57678090



AIR CONDENSERS   (2821)

Borosilicate glass, Overall length 25 cm.



AIR CONDENSERS   (2822)

Borosilicate glass, Effective Length 25cm. Socket 14/23 and Cone 14/23.



CONDENSERS, LIEBIG   (2823)

Borosilicate glass, inner tube integral with body, narrow jacket for efficient cooling.
 Length of Jacket (cm)Total Length (cm)
A3048
B4059
C50 71



CONDENSER LIEBIG   (2824)

Borosilicate glass.
 Length (cm)SocketCone
A16.514/2314/23
B2019/2619/26
C2024/2924/29
D3519/2619/ 26



CONDENSER, ALLIHN   (2825)

Borosilicate glass, an inexpensive condenser, giving greater surface area than corresponding Liebig type due to the bulb sections.
 Length of Jacket (cm)Total Length (cm)
a3048
b4059
c50 71



CONDENSERS, GRAHAM   (2826)

Borosilicate glass. Designed for high degree of coolant turbulence and permits the use of thin wall tubing without sacrificing strength.
 Length of Jacket (cm)Total Length (cm)
a3048
b4059
c50 71
Above Condensers can be supplied with Socket and Cone of size 14/23, 19/26, 24/29, 29/32 on extra cost.



FRACTIONAL DISTILLATION COLUMNS   (2827)

YOUNG’S Borosilicate glass, Pear shaped bulbs, suitable for high boiling point liquids. With side arm.
 AB
No. of Bulbs812
Length (mm) 430590



FRACTIONAL, DISTILLATION COLUMNS   (2828)

Rod and disc pattern, Borosilicate glass, removable center rod with discs fitting inside a smooth bore tube with side arm, Number of disc 20 and overall length 480 mm.



DISTILLING TUBE PLAIN   (2829)

Total Length is 200 mm. and outer Dia. of Tube is 15 mm.



DISTILLING TUBE   (2830)

With one Bulb. Total Length is 250mm. and Outer Dia. of 17 mm. and of Bulb is 40 mm.



DISTILLING TUBE   (2831)

With two Bulbs. Total Length 300mm. Outer Dia. of Tube 17mm. and of Bulb is 40 mm.



DISTILLING TUBE   (2832)

With three Bulbs. T otal Length400mm. Outer Dia. of T ube 17mm. and of Bulb 40 mm.


Beakers   (3101)

Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance.  These autoclavable Beakers have prominently raised graduations on the outer surface.  Pouring a solution becomes very convenient because of its tapered spout.

Material : Polypropylene

Item CodeParticularLeast Count Packing
a.50ml512
b.100ml512
c.250ml1012
d500ml1012
e1000ml256
f2000ml2506



Beakers (Euro Design)   (3102)

Material : Polypropylene
Item CodeParticularLeast Count Packing
a.25ml512
b.50ml512
c.100ml512
d250ml1012
e500ml1012
f1000ml206


Measuring Beakers   (3103)

Material : PP Autoclavable
Item CodeCapacity ml Packing
a.66
b.1206
c.2406
d5006

Material : TPX Autoclavable

Item CodeCapacity ml Packing
a.66
b.1206
c.2406
d5006


Burette   (3104)

This Burette has a transparent acrylic body and a leakproof stopcock made fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/ wt of acids or 30% bases.

Material : PMMA/TPX

Item Code Capacity ml Packing
a. 25 10
b. 50 10



Pipette Pump   (3105)

The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying.  The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes.  It resists acids & alkalies and can be easily disassembled for thorough cleaning.

Material : PP

Item CodeCapacity ml Packing
a.212
b.1012
c.2512



Dropping Bottles   (3106)

Blown in Low Density P olyethylene, P olylab Dropping Bottles dispense small uniform drops of liquids when pressed lightly .

Material : PP Autoclavable

Item CodeCapacity ml Packing
a.6012
b.12512



Reagent Bottles (Narrow Mouth)   (3107)

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene.  The PP bottles are rigid, treanslucent and have excellent contact clarity.  These bottles can be autoclaved filled as well as empty.  On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable.  The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Material : LDPE

Item CodeCapacity ml Packing
a.6012
b.12512
c.25012
d.50012
e.10006



Reagent Bottles (Wide Mouth)   (3108)

These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clar ity. These bottles can be autoclaved filled as well as empty . On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles lea kproof.

Material : PP Autoclavable

Item Code Capacity ml Packing
a. 60 12
b. 125 12
c. 250 12
d. 500 12
e. 1000 6



Aspirator Bottles   (3109)

Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.

Material : Polypropylene

Item CodeCapacityPacking
a.1 Ltr.1
b.10 Ltr. 1
c.20 Ltr. 1



Wash Bottles   (3110)

Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character.  Solutions can be poured easily by squeezing the bottle lightly.  The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.

Material : LDPE

Item CodeCapacity ml Packing
a.12512
b.25012
c.5006
e.10006



Wash Bottles (New Type)   (3111)

These bottles are also made of Low Density polyethylene and are therefore translucent & unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece Wash Bottle.  These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.

Material : LDPE

Item CodeCapacity ml Packing
a.25012
b.50012
c.12512



Conical Flask   (3112)

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving.

Material : PP Autoclavable

Item Code Capacity ml Packing
a. 100 6
b. 250 6
c. 500 6



Fisher Clamp   (3113)

These Clamps are moulded in Polypropylene making it completely corrosion-proof.  The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping.  Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Material : PP Autoclavable

Item CodeDescriptionPacking
a.Single12
b.Double6



Funnel Holer   (3114)

Made of Polypropylene these corrosion fee Funnel Holders can hold funnels with dia 3" to 6".  The extra plate provided can be placed to hold funnels bearing dia 1" to 3".  Two tapered wedges are provided to ensure firm grip on Rods having dia 1/2" or 3/8".

Material : PP

Item Code Description Packing
45103Single12
122200Double2



Separatory Funnel Holder   (3115)

This non-corrosive Separatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Material : PP

Item Code Description Packing
aSingle12



Flask Stand   (3116)

Moulded in Polypropylene, this Flask Stnad gives a stair-like top view.  Every step provides excellent support to the round bottom flask at every point of Contact. This Flask Stand can hold round bottom Flasks up to 19 Ltr. capacity.  This Stackable Flask Stand can also be steam autoclaved.

Material : RPP

Item Code ØmmPacking
a1606



Animal Cage   (3117)

Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboratory . The metallic top provides proper ventilation and has provisions for feeding the species.

Material : PP Autoclavable

Item Code (lxbxh)cmPacking
a43x27x156
b29x22x146

Material : PC Autoclavable

Item Code (lxbxh)cmPacking
c29x22x146



Retort Stand   (3118)

These non-corrosive, moulded R etort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non- corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable R etort Stand.

Material : PP/PC

Item Code ParticularsPacking
a225x150 mm side hole 1
b300x200 mm Centre hole 1
c300x200 mm side hole 1



Desiccator (Vacuum)   (3119)

Desiccators are made of P olypropylene and P olycarbonate. These autoclavable vacuum desiccators can hold vacuum upto 740 mm of Hg for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent P olycarbonate, gives a crystal clear view of the disiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of P olypropylene. An internal groove is provided on the flange to hold a silicon rubber O -Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off & vacuum releasing.

Material : PP/PC

Item Code Ø mmPacking
a1501
b2001
c2501



Desiccator (Plain)   (3120)

Plain Desiccators are physically the same as V accum Desiccator . Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vaccum & Plain Desiccators are provided with a thick perforated P olypropylene disc with a big hole in the centre for easy lifting . The tiny holes in the disc provide air troughs & support to the dishes. However porcelain discs are advisable in case of incandescent crucibles.

Material : PP/PC

Item Code Ø mmPacking
a1501
b2001
c2501



Stop Cocks 3121   (3121)

These polypropylene stop cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6 mm to 10 mm tubing . These stop cocks are absolutely leadproof and are available in two different options i.e. 2 way & 3 way .

Material : PP/PTFE

Item CodeDescriptionPacking
a.2-Way6
b.3-Way6



Kipp's Apparatus   (3122)

Kipp's Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. H2S gas then evolved collects in the middle dome form where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outer fitted with a cap for easy cleaning.

Material : PP

Item CodeCapacity(ml)Packing
a.2501
b.5001
c.10001



Funnels-Long Stem   (3123)

These long stem funnels have smooth walls, 60 cone angle and external rib to prevent air lock. Moulded in P olypropylene, these clear funnels can also be steam autoclaved.

Material : PP/PC

Item Codeø mm  Packing
a.5072
b.6236
c.7536
d10036
e15012



Buchner Funnel   (3124)

Autoclavable Moulded in P olypropylene, these two piece funnels are light weight, e asy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing . The base of the top portion has a perforated filter plate.

Material : PP

Item Code Ø mmPacking
a7012
b1106



Petri Dish   (3125)

These Polypropylene P etri Dishes are clear , unbreakable & autoclavable. Newly added PS P etri Dish with fitting proves excellent for culture exp.

Material : TPX Autoclavable

Item Code Ø mmPacking
a5036
b7536
c10036
d12512
e15012



Atomic Model Set   (3126)

These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds. Senior Set : This set consists of 150 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for

Material : PP/LDPE

Item Code DescriptionPacking
aSenior Set 1
bJunior Set 1



Crystal Model Set   (3127)

These Crystal Model Sets contain different coloured jac ks (Red, Black & White) & Connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

Material : PP/LDPE

Item Code DescriptionPacking
aDiamond1
bSodium Chloride 1
cGraphite1



Coplin Jar   (3128)

Made of Polypropylene can hold 10 slides of the size 1" x 3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

Material : PP

Item Code PlacesPacking
a1012



Slide Mailer   (3129)

Slide Mailer present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in two sizes i.e.2 slides & slides.

Material : PP

Item Code PlacesPacking
a225
b525



Slide Box   (3130)

These Slide Boxes are durable, compact & provide ut most protection to 1" x 3" s lides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof .

Material : PS

Item Code PlacesPacking
a2512
b5012
c1006



Micro Centrifuge Tube   (3131)

These Micro Centrifuge T ubes, moulded in P olypropylene, have built in plugs which snap fit and make these tubes leakproof . these tubes can withstand high forces of an ultra centrifuge and can be used for transmitting samples for micro analysis.

Material : PP Autoclavable

Item Code Capacity ml Packing
a0.51000
b1.51000



Float Rack   (3132)

This float Rack moulded in P olypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting .

Material : Polycarbonate/Polypropylene

Item Code ParticularsPacking
a16 MCTs of 1.5 ml 4



MCT Twin Rack   (3133)

Twin Purpose Rck for both 0.5 ml. & 1.5 ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCT's, respectively . The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.

Material : Polypropylene

Item Code ParticularsPacking
afor 0.5 ml & 1.5 ml MCTs 4



PCR Tube Rack   (3134)

This rack, as the name suggests, is used for keeping PCR T ubes. Top & base of this rack are made of tough & transparent polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no. of racks can be stacked together to save shelf space.

Material : Polycarbonate/Polypropylene

Item Code ParticularsPacking
afor 96 Tubes of 0.5 ml 4



MCT Box   (3135)

MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT s of 1.5 ml. & the other can hold 100 MCT's f 0.5ml.. These boxes are designed to work at temperatures ranging from -190ºC to + 121ºC. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.

Material : Polycarbonate

Item Code Particulars Packing
a for 100 MCTs of 0.5 ml 4
b for 64 MCTs of 1.5 ml 4



Centrifuge Tube Conical Bottom   (3136)

Centrifuge tubes with conical bottom are available in two sizes i .e. 15ml. & 50ml. Moulded in P olypropylene, these tubes are clear , strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof . These tubes can withstand forces upto 7500xG & 12000xG for 15 ml. & 50ml. tubes respective ly. These tubes are available sterilized as well as non- sterilized.

Material : Polypropylene

Item Code Capacity ml.Packing
a15100
b50100
c15 (Sterile) 100
d50 (Sterile) 100



Centrifuge Tube Round Bottom   (3137)

Centrifuge Tubes with round bottom are moulded in P olypropylene & P olycarbonate. These tubes have excellent clarity and are strong enough to be us ed upto 50,000xG . These tubes can be autoclaved.

Material : PP Autoclavable

Item Code Capacity mlPacking
a1612
b5012

Material : PC Autoclavable

Item Code Capacity mlPacking
c1612
d5012

Material : PP Autoclavable

Item Code Capacity mlPacking
e16100
f50100



Oak Ridge Centrifuge Tubes   (3138)

Oak Ridge Centrifuge T ubes, made of P olypropylene, have excellent contact clarity and can be used upto 50,000xG . The screw cap is fitted with silicon O -Ring making it totally leakproof . These tubes should not be used below 4ºC.

Material : PP Autoclavable

Item Code Capacity mlPacking
e3012
f5012



Sample Container (Screw Type)   (3139)

Sample Containers are made of P olypropylene. These thin walled, disposable th containers are easily screw capped with less than 1/4 of a rotation. As one screw caps the container , the top of it sets in a domed ring in the cap making it completely leakproof. This is perhaps the ideal most option available for carrying samples from one place to another safe & sound.

Material : Polypropylene

Item Code Capacity mlPacking
a30100



Urine Container   (3140)

These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built -in seal that makes it completely leakproof .

Material : Polypropylene

Item Code Capacity mlPacking
a30100
b60100



Stool Container   (3141)

These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.

Material : PP Autoclavable

Item Code Capacity mlPacking
a3012
b5012



Ria Vial   (3142)

These Polypropylene/P olystyrene tubes are generally used in RIA,Coagulati on & Bacteriology . The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent P olystyrene tubes can withstand 1400 RCF . The PP tubes can acept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases , weak acids but not organic solvents.

Material : Polypropylene

Item Code Capacity mlPacking
a12x72 mm Ps 100
b12x75 mm PP 100
cCap for 12mm Vial 100



Ria Vial With Screw Cap   (3143)

These polypropylene vials are unique because the cap fitted with an O -ring can be screwed into the vial making it a leakproof vial which can be used in RIA, Coagulation & Bacteriology etc.

Material : Polypropylene

Item Code ParticularsPacking
a12x75 mm 500



Test Tube Cap   (3144)

This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer groves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.

Material : Polypropylene

Item Code ParticularsPacking
aCap for Test Tube Ø25mm 100



Storage Vial   (3145)

As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190 C. The Cap is provided with a built in seal ring making the vial leakproof . The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.

Material : Polypropylene/Polythylene

Item Code Capacity ml. Packing
a1.0500
b2.0500
c3.0500



Storage Vial With O-Ring   (3146)

This newly added vial has an O -ring in the cap that makes it absolutely leakproof . Like other storage vials this vial can also be used for storage purposes at temperatures as low as -190ºC.

Material : Polypropylene

Item Code Capacity ml. Packing
a2.0500



Sv10-Sv5   (3148)

These polypropylene vials add to the existing range of JS storage v ials. Available in 5 ml & 10 ml. capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial. Just like others storage vials these vials are also used for the storage of biological material, animal & human cells etc.

Material : Polypropylene

Item Code Capacity mlPacking
aSV-10 ml500
bSV-5 ml500



Scintillation Vial   (3149)

These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

Material : HDPE

Item Code Capacity ml Packing
a 8 100
b 20 100



Rack for Scintillation Vial   (3150)

These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml. & 20 ml. vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.

Material : PP

Item Code Places Capacity ml Packing
a 50 20 2
b 90 8 2



Cryo Vial-Internal Thread   (3151)

Adding to the existing range of Cryo Vials is this vial which has internal thread in it. The cap fitted with an O -ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long marking area for sample identification.

Material : Polypropylene

Item Code Capacity mlPacking
a2.0500



Cryo Vial 3152   (3152)

Cryo vials are normally used for storage of Biological material, human & anim al cells 0 at temperature as low as -190C. These sterilized tubes are provided withwhite, prominent graduations and al ong marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof . The longitudonal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.

Material : PP/HDPE

Item Code Capacity mlPacking
a1.01000
b1.81000
c4.5500



Cryo Coders   (3153)

These Coders available in difF erent colours can easily fit into the cap of cryo vials for colour identification of different samples.

Material : PS

Item Code ColoursPacking
aWhite100
bBlue100
cRed100
dYellow100



Cryo Rack   (3154)

Cryo Rack is moulded in P olycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.

Material : Polycarbonate

Item Code ParticularsPacking
3154Cryo Rack 2



Cryo Box (PC)   (3155)

Polylab Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accomodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190ºC to +121ºC. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control..

Material : PP

Item Code ParticularsPacking
a81 places for 1 ml or 1.8 ml Cryo Vials4
b81 places for 4.5 ml Cryo Vials4
c100 places for 1 ml or 1.8 ml Cryo Vials4



Cryo Box (PP)   (3156)

Moulded in P olypropylene, the top of the box is attached to the bottom through well designed built -in hinges. The bottom has built -in spaces to hold vials up to 2ml. capacity . Available intwo different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.

Material : Polycarbonate

Item Code ParticularsPacking
a81 places for 1 ml or 1.8 ml Cryo Vials4
b100 places for 1 ml or 1.8 ml Cryo Vials4



Immunology Plates   (3157)

Elisa/ Assay plates are made of optically clear , non-toxic Polystyrene. These plates with 96 U Bottom or flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. These plates packed individually are available non- sterile as well as radiation sterilized.

Material : Polystyrene

Item Code ParticularsPacking
aFlat Bottom Elisa Plate 72
bU Bottom Elisa Plate72
cFlat Bottom Assay Plate72
dU Bottom Assay Plate 72
eFlat Bottom Elisa Plate-Sterile72
fU Bottom Elisa Plate-Sterile72
gFlat Bottom Assay Plate-Sterile72
hU Bottom Assay Plate-Sterile72



Micro Tip Box   (3158)

These unique boxes are moulded in P olypropylene and are therefore autoclavable. The box itself is clear providing an excellent view of the tips inside hile a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

Material : PP Autoclavable

Item Code ParticularsPacking
aFor 96 Micro Tips of 2-200 µl 12
bFor 100 Micro Tips of 200-1000 µl 12



Volumetric Flask   (3159)

Blown in Polypropylene, are strong , unbreakable and have good contact clarity . These autoclavable flasks ae provided with screw caps to prevent leakage.

Material : PP Autoclavable

Item Code Capacity ml Packing
a256
b506
c1006
d2503
e5003
f10002



Petri Dish (Disposable)   (3160)

These transparent, ready to use, disposable Petri Dishes are made of optically clear , are sterilized by radiation.

Material : Polypropylene

Item Code ParticularsPacking
a90 mm Radiation Stz.460
b60 mm Radiation Stz.300
c35 mm Radiation Stz.500



Rack For Petri Dishes   (3161)

This Rack is a clear acrylic construction with white Polycarbonate Posts. It has a capacity to hold 60 petri dishes of 90 mm size. This rack is very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation.

Material : Acrylic/Polycarbonate

Item Code ParticularsPacking
aRack for Petri Dishes 2



Test Tube Stand   (3162)

This autoclavable Stand is perhaps the most commonly used T est Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding25 mm dia test tubes, four holes 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes.

Material : Polypropylene

Item Code ParticularsPacking
a16 mm & 25 mm Ø Tubes 12
b25 mm Ø Tubes 12



Test Tube Stand (Round)   (3163)

A handy, little, space saver , this circular twelve place P olypropylen Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

Material : Polypropylene

Item Code ParticularsPacking
a19 mm & 25 mm Ø Tubes 2



Test Tube Stand (3 Tier)   (3164)

These ingenious racks with a 3-tier design provide clear v iew of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable R acks can withstand sub -freezing temperatures.

Material : Polypropylene

Item Code ParticularsPacking
a13 mm x 31 Tubes 2
b16 mm x 31 Tubes 2
c20 mm x 20 Tubes 2
d25 mm x 12 Tubes2
e25 mm x 18 Tubes2
f32 mm x 12 Tubes2
g25 mm x 36 Tubes2
h13 mm x 18 Tubes 4
i15 mm x 18 Tubes4
j18 mm x 12 Tubes 4
k13 mm x 62 Tubes 2
l16 mm x 62 Tubes 2
m20 mm x 40 Tubes 2



Test Tube Stand (3 Tier)   (3165)

These ingenious racks with a 3-tier design provide clear v iew of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable R acks can withstand sub -freezing temperatures.

Material : Polycarbonate

Item Code ParticularsPacking
a13 mm x 31 Tubes 2
b16 mm x 31 Tubes 2
c20 mm x 20 Tubes 2
d25 mm x 12 Tubes2
e13 mm x 62 Tubes 2
f16 mm x 62 Tubes2
g20 mm x 40 Tubes2
h25 mm x 24 Tubes2
i25 mm x 18 Tubes2
j25 mm x 36 Tubes2
k32 mm x 12 Tubes2



Rack For Micro Centrifuge Tube   (3166)

Moulded in Polycarbonate, this autoclavable rack is made for holding twenty four 1.5 ml. micro centrifuge tubes. This rack has a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.

Material : Polycarbonate

Item Code PlacesCapacity ml Packing
a241.506
b481.506



Test Tube Stand (Wire Pattern)   (3167)

An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty . These are available in different colours and are made of a special blend of P olypropylene that makes it sink in a water bath and maintain their stability even in agitated water . These spce saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.

Material : Polypropylene

Item Code ParticularsPacking
a13 mm x 90 Tubes 6
b16 mm x 60 Tubes 6
c20 mm x 40 Tubes 6
d25 mm x 24 Tubes6



Test Tube Baskets   (3168)

Test Tube Baskets are made of P olypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation.

Material : Polypropylene

Item Code ParticularsPacking
a140 x 120 x 100 mm 6
b160 x 160 x 160 mm 6
c400 x 400 x 100 mm 6



Pipette Stand (Horizontal)   (3169)

This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal p osition. Moulded in P olypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with P olypropylene. This stand can be easily disassembled for space saving storage.

Material : Polypropylene

Item Code ParticularsPacking
aFor 12 Pipettes 6



Pipette Stand (Vertical)   (3170)

This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pi pette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

Material : Polypropylene

Item Code ParticularsPacking
aFor 28 Pipettes 1



Pipette Stand (94 Pipettes-Rotary)   (3171)

Moulded in Polypropylene, this unique Stand holds a maximum 94 pipettes and rotates on a central vertical axis for convenient selection of any pa rticular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protective and permit water drop s to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

Material : Polypropylene

Item Code ParticularsPacking
aFor 94 Pipettes 1



Pipette Box   (3172)

Made of polypropylene, this P ipette Box is designed is such a way that it can hold Pipettes of different lengths. The top of the box screws on the bottom and the height can be adjusted by screwing or unscrewing the top.

Material : Polypropylene

Item Code CapacityPacking
aPipette Box 4



Reagent Reservoir   (3173)

Moulded in Polypropylene, this autoclavable R eagent R eservoir is helpful for multi- channel pipettes to be used into microliter plates.

Material : Polypropylene

Item Code Capacity ml Packing
a7512



Ice Bucket   (3174)

This Ice Bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.

Material : Polypropylene

Item Code CapacityPacking
aIce Bucket 1



Staining Box   (3175)

Moulded in P olypropylene, this Staining Box helps in staining , fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist 00 temperatures from -70C to +70C. The LDPE plug provides leakproof seal and allows easy liquid drainage.

Material : Polypropylene

Item Code ParticularsPacking
a125 x 125 x 50 mm 100



Measuring Cylinders   (3176)

Measuring Cylinders, moulded in Polypropylene & TPX , are single piece cylinders. and have excellent contact clarity . The broad base provides good stability.

Material : Polypropylene

Item Code ParticularsLeast Count Packing
a10 ml 0.2 ml 24
b25 ml0.5 ml 12
c50 ml 1 ml 12
d100 ml 1 ml 12
e250 ml 2 ml 6
f500 ml 5 ml 4
g1000 ml 10 ml 3
h2000 ml 20 ml 2

Material : TPX (Poly Methyl Pentene)

Item Code ParticularsLeast Count Packing
a10 ml 0.2 ml 24
b25 ml0.5 ml 12
c50 ml 1 ml 12
d100 ml 1 ml 12
e250 ml 2 ml 6
f500 ml 5 ml 4
g1000 ml 10 ml 3



Measuring Cylinder Hexagonal   (3177)

Measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout wor ks really well while pouring any reagent.

Material : Polypropylene

Item Code ParticularsLeast Count Packing
a10 ml 0.2 ml 24
b25 ml0.5 ml 12
c50 ml 1 ml 12
d100 ml 1 ml 12
e250 ml 2 ml 6
f500 ml 5 ml 4
g1000 ml 10 ml 3



Measuring Cylinder Pentagonal   (3178)

Adding to the range of round & hexagonal base cylinders are the pentagona l ones. Polylab now offers you a wide range of cylinders with different b ases to choose from. Prominently raised graduation & excellent contact clarity are among the other features of these cylinders.

Material : Polypropylene

Item Code Particulars Least Count Packing
a 10 ml 0.2 ml 24
b 25 ml 0.5 ml 12
c 50 ml 1 ml 12
d 100 ml 1 ml 12
e 250 ml 2 ml 6
f 500 ml 5 ml 4
g 1000 ml 10 ml 3



Measuring Jugs   (3179)

These handy Jugs, moulded in Polypropylene, are clear , autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading .

Material : Polypropylene

Item Code ParticularsLeast Count Packing
a250 ml 10 ml 12
b500 ml10 ml 12
c1000 ml 10 ml 6
d2000 ml 20 ml 6



Conical Measures   (3180)

These Conical Measures are very good for measuring small qua ntities of reagents. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability . The Measures are clear , have good chemical resistance and have raised graduations for easy.

Material : Polypropylene

Item Code ParticularsLeast Count Packing
a12 ml 112
b25 ml112
c50 ml 212
d125 ml 512
e200 ml 512



Separatory Funnel   (3181)

Separatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the separatory funnel.

Material : Polypropylene

Item Code ParticularsPacking
a100 ml 2
b250 ml2
c500 ml 2



Spatula   (3182)

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

Material : Polypropylene

Item Code ParticularsPacking
a150 mm12
b200 mm12



Pneumatic Trough   (3183)

These Troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.

Material : Polypropylene

Item Code ParticularsPacking
aØ-180 x h-60 mm 6
bØ-200 x h-100 mm6
cØ-250 x h-100 mm4



Plantation Pots   (3184)

Plantation Pots, moulded in polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.

Material : Polypropylene

Item Code ParticularsPacking
a100 mm 20
b150 mm 20
c200 mm 20
d250 mm 20



Laboratory Tray   (3185)

Laboratory Tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.

Material : Polypropylene

Item Code Particulars Packing
a 450 x 350 x 75 mm 10
b 375 x 300 x 75 mm 10



Utility Tray   (3186)

Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.

Material : Polypropylene

Item Code ParticularsPacking
a375 x 350 x 135 mm 6



Carrier Tray   (3187)

This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.

Material : Polypropylene

Item Code ParticularsPacking
a380 x 240 x 115 mm 6



Magenta Box   (3188)

Magenta Box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent Polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene. This autoclavable box is square in shape giving itself a space saving feature.

Material : Polypropylene

Item Code ParticularsPacking
aMagenta Box 12



Storage Boxes   (3189)

These Storage Boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagent & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.

Material : PP

Item Code ParticularsPacking
a250 ml 12
b500 ml 12
c1000 ml 12



Simple Cell Pot   (3190)

Simple Cell Pot, as the name suggests, is used for making Simple Cells & V oltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durable than the one used conventionally.

Material : Polypropylene

Item Code ParticularsPacking
aSimple Cell Pot 12



Leclanche Cell Pot   (3191)

Blown in Polypropylene, this Pot is used for maing Leclanche Cell. This Pot too has very good contact clarity & excellent chemical resistance.

Material : Polypropylene

Item Code ParticularsPacking
aLeclanche Cell Pot12



Sample Container (Press & Fit Type)   (3192)

Made of polypropylene, these disposable Containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these containers have cap the work in a press & fit manner & make these containers leakproof. These disposable containers are E.T.O. sterilized.

Material : Polypropylene

Item Code ParticularsPacking
a50 ml 100
b30 ml 200



Stirrer   (3193)

Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting.

Material : Polypropylene

Item Code ParticularsPacking
aØ-10 mm x h-250 mm 12



Connectors   (3194)

Made of polypropylene, these Connectors are basically pipe-like structures in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edged prevent leakage & Slippage.

Material : Polypropylene

Item Code ParticularsPacking
aT-Connectors36
bY-Connectors36





 
 
© J S Exports 2009. All Rights Reserved.